Interrupting An Operation; Interrupting; Figure 1-26 Touching Cancel On The Touch Panel - NEC IT3510 Operation Manual

Issue 1
S 7 I
ECTION NTERRUPTING AN
7.1
1 - 32
The registration or setting screen can be canceled by touching [Cancel]
Ë
when [Cancel] is displayed on either screen.

Figure 1-26 Touching Cancel on the Touch Panel

O
PERATION

Interrupting

Copying or printing operations can be suspended to allow other documents to
be copied or transmitted.
Before Starting Operations:
Interruption is not possible during document scanning for transmission.
When a facsimile is received while operation is interrupted, the received data is stored
in memory without being printed. For more details, refer to
the Communications Status in Chapter 6 Advanced Sending and Receiving
Operations on page 6-1.
Sorting, grouping, stapling, and hole punching cannot be used when an operation is
interrupted.
The Interrupt key lamp is lit while an operation is being interrupted.
NEC IT Series
Section 2.1 Confirming
Getting Started