Issue 1
9.7
1 - 70
Cleaning
This section describes how to clean various areas of the machine.
Before Starting Operations:
Use a soft cloth slightly dampened with water, or a gentle cleanser. Be certain to
thoroughly wring out the cloth before using it, as dripping any liquid inside the unit can
cause product failure.
The panel-cleaning screen should be selected on the touch panel before cleaning it
begins.
i
Both the glass surface of the document scanning area and the document feed rollers
should be cleaned often in order to maintain high image quality. Any dirty or paper
dust on these surfaces can adversely affect the copy quality. Maintaining a regular
cleaning schedule will keep these areas free of contaminants.
Cleaning the External Surfaces
1. Using a damp cloth, wipe each surface area of the unit.
Figure 1-85 Cleaning the External Surfaces
NEC IT Series
Getting Started