NEC IT3510 Operation Manual page 241

NEC IT Series
NEC IT3510/IT2510 Operations Manual
Registering Users (Continued)
2. Touch a key for the
communication port to be set
as the initial value, then touch
[Enter].
i
[Com. Mode] is displayed only
when the optional 2nd G3 Port
is installed.
Setting the Transmission Mode:
1. Select [TX2], then touch [TX].
2. Touch a key for the transmission
mode to be set as the initial
value, then touch [Enter].
Setting the TSI:
1. Touch [TX2], then touch [TSI].
Issue 1
3 - 47