Issue 1
8 - 12
Paper Jam at the Main Unit Side Cover:
1.
Pull on the lever to open the
Side Cover.
2.
Slowly withdraw the jammed
paper.
i
The area around the fuser
is very hot! Do not touch
anything other than the
jammed paper.
i
Try to remove the jammed
paper without removing
the imaging unit, if
possible. Doing so may
cause the toner to spill.
i
Never touch the Transfer
Roller (black roller).
Printed image quality may
become poor.
3.
Close the Side Cover.
i
If the jammed paper
cannot be removed from
the Side Cover:
Pull out the paper cassette holding
the paper supply that was used,
then remove the jammed paper
from the cassette side.
NEC IT Series
Transfer Roller
Troubleshooting