Issue 1
2.12
3 - 32
Registering the Password for Password Communications (Continued)
3.
Use the 10-key Pad to enter the
communication password (two
digits), then touch [Enter].
i
To re-enter the number:
Press <C> (clear key) and re-enter the
number. When [Cancel] is touched, it
returns to the initial status.
4.
Confirm the setting details when
the screen returns as that shown
in step 2. Touch [Enter] if the
setting is correct.
i
To modify:
Touch [Com. Password] to re-register.
5.
Touch [Enter] repeatedly until
the display returns to the stand-
by screen.
Setting the Management Mode
Unauthorized use of the NEC IT3510/IT2510 can be prohibited, or the number
of copies made by each user can be restricted. Passwords are set for each
department, or for individual users.
Before Starting Operations:
When Limited is set, the unit cannot be used without selecting the user (department
or individual user).
The factory default setting is Open.
NEC IT Series
Registration and Setting Operations