Advanced Registration; Registering Relay Groups - NEC IT3510 Operation Manual

NEC IT Series
S 3 A
ECTION DVANCED
The following section describes the procedures for registering more advanced
features and items into the NEC IT3510/IT2510.
3.1
NEC IT3510/IT2510 Operations Manual
R
EGISTRATION

Registering Relay Groups

Registering the receiving station(s) as a relay group simplifies specifying final
destination(s) when the IT3510/IT2510 is used as a relay station during relay
transmission.
Before Starting Operations:
Up to five relay groups can be registered. The groups are numbered 1 to 5.
Up to 200 receiving stations can be registered per group.
Use abbreviated dialing numbers to select destinations registered in a relay group.
The final destinations must be registered in advance as either One-Touch keys or
Abbreviated Dialing keys.
Any registered details can always be deleted or modified.
Confirming the Registered Information:
The Relay Group List will verify the registered stations. Refer to Section 1.10 Printing
the Relay Group List in Chapter 7 Reports and Lists on page 7-16.
Registering Relay Groups
1.
Press <Utility>.
2.
Select [Reg.] and touch
[Relay Group].
Issue 1
4 - 51