Dial Registration - NEC NEFAX655e Manual

Dial Registration

This section gives instructions on how to program the number to be stored in the One-
Touch, Speed Dial, and Group Dial keys. In addition, it shows how to set up special
parameters for each One-Touch key, including batch Time and Relay Broadcast.
One-Touch keys
You can program the most frequently dialed fax numbers into One-Touch keys. This
allows you to transmit documents simply by pressing a One-Touch key and the Start
key. You can program any of the One-Touch keys as Group Dial keys with up to 50
locations in each.
Edit/Deleting
Facsimile Programming
1
Press the Program key and scroll through the
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
2
Press YES since this is the first menu to appear and
press YES to enter the One-Touch Program.
3
Press the One-Touch key you wish to program.
4
Press YES to accept the selection.
5
Enter the telephone number you wish to transmit to
and press YES.
6
Enter the Name you wish associated with this
number and press YES after checking to see if it is
OK.
1
If you wish to change any entry, a screen allows you to accept it or change it.
2
If you wish to change a Key that was previously
programmed, this message appears. Press YES to
keep this location as is, or NO if you wish to edit it.
3
If you choose NO, use the arrow keys to select
either EDIT or DELETE and then proceed with the
needed changes.
Dial Registration
DIAL REGISTRATION?
YES / or 1-6
1 ONE-TOUCH DIAL?
OK=YES
-SELECT REGIST. KEY-
ONE-TOUCH 01
or PRESS "YES"
OK=YES
NAME=_
OK=YES
REGISTERED! KEEP?
OK=YES (EDIT/DEL=NO)
EDIT *DELETE
-SELECT&PUSH"YES"-
4 - 18