Program Dial - NEC NEFAX655e Manual

Dial Registration

Program Dial

Instead of their regular functions, any of the last eight One-Touch keys (57-64) can be
used as Program keys. Transmission functions including: Broadcast, Timer TX
(Delayed Transmission), Mailbox, Polling RX, and Relay Initiation can be programmed
into the programmed One-Touch keys. This allows you to "One-Touch" an operation
that normally takes multiple key strokes.
Settings entered into these program keys remain in memory for future use.
Entering
For 1=Broadcast:
4 - 21
3
If you choose NO, use the arrow keys to select
either EDIT or DELETE and then proceed with the
needed changes.
1
Press the Program key and scroll through the
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
2
Press 4 or scroll down to the Program Dial menu
and press YES.
3
Press the One-Touch key you wish to use.
Remember, it must be one of the last eight.
4
Choose the function you wish to program:
1=Broadcast, 2=Timer TX, 3=Mailbox TX,
7=Polling RX, and 8=Relay Initiate.
Note: To continue with this process, choose the group of steps that match your needs.
5
A screen appears to confirm Broadcast was your
selection.
6
Enter the Key(s) you wish included in this group.
Remember, you can include One-Touch or Speed
Dial already in memory.
7
Continue to enter the locations you wish to include and then save. You are given the
EDIT *DELETE
-SELECT&PUSH"YES"-
DIAL REGISTRATION?
YES / or 1-6
4 PROGRAM DIAL?
OK=YES
-SELECT REGIST.KEY-
FUNCTION
SEL. 1/2/3/7/8
BROADCAST
NO.001=_
Facsimile Programming