NEC NEFAX655e Manual page 139

Configuring the GDI Print Settings
Printing with your GDI Print Function
PC Printing & Scanning
Configure the settings for the GDI printer function the same as you would for any
other printer. Refer to your Windows or software application manual.
In most applications, you configure the paper size in the application.
To configure the paper source:
•
For the Bypass Feed Tray, place paper in the Tray. The Bypass paper
will be selected first.
•
For the 2nd Cassette, the NEFAX655e will automatically select the
correct paper size. If both cassettes are the same size paper, the Top
Tray will be selected first. If it runs out of paper, the unit automatically
selects the Bottom Tray and continues.
After you install the GDI print driver, you can select and use it in your Windows
applications just as you would any other printer. When you select Print, the file to
be printed is spooled inside the PC and then sent to your NEFAX655e unit.
Printed sheets exit onto the receiving Paper Exit tray.
GDI Printer Feature(Option)
6 - 14