Multi-Tasking - NEC NEFAX655e Manual

Multi-Tasking

Operation
Copy
Fax Reception
Fax
Transmission
PC-Fax
Reception
PC-Fax Transmit
Introduction
The NEFAX655e can perform multiple operations at the same time. One
operation can run in the foreground, while another one runs in the background.
For example, you can scan, copy, or print documents into memory for later
transmission while receiving a fax.
Concurrent Operation
Fax Reception
GDI/PCL4 Printing
Memory Fax Transmission
PC-Fax Transmission or
Reception
Copy
GDI/PCL4 Printing
Fax Transmission
Copy
GDI/PCL4 Printing
Copy
Parallel Port Printing
Fax Transmission
Copy
Parallel Port Printing
Fax Transmission
Result
The received fax is stored in memory, and prints once
copy operation is complete.
The print job is stored in memory, and prints once copy
operation is complete.
Faxing begins while copying continues.
Faxing begins while copying continues.
The Copy job will be stored in memory, then printed
out when reception (RX) is complete.
Prints a document during reception.
Scans a document into memory for transmission.
The available memory is shared by both jobs and their
operations happen simultaneously.
The document will be printed from the PC during a Fax
operation.
The copy operation starts by scanning a document into
memory, and prints as fax is being transmitted.
The print operation occurs while the PC is receiving the
fax.
TX works when PC-Fax is complete. Scans document
into memory for transmission.
The copy operation starts by scanning document into
memory first, and prints as a fax is being transmitted.
A Parallel Port can be used for printing during the PC-
FAX operation.
Scans a document into memory for transmission.
Multi-Tasking
1 - 4