Scan Contrast
There are three contrast levels of Light, Normal, Dark that you can select depending on
your original document. For documents with very fine or light characters, choose a
lighter level.
Print Density
Set the print density according to your needs. There are six printing density levels
ranging from Light to Dark.
Facsimile Programming
1
Press the Program key and scroll through the
menus until you reach the SCANNING &
PRINTING Menu. Press YES to begin
programming.
2
Press 2 or scroll down to the Scan Contrast menu
and press YES.
3
Using the Left and Right arrows, select the contrast
you wish to have as the default and press YES to
enter this selection into memory.
1
Press the Program key and scroll through the
menus until you reach the SCANNING &
PRINTING Menu. Press YES to begin
programming.
2
Press 3 or scroll down to the Print Density menu
and press YES.
3
Using the Left and Right arrows, select the density
you wish to have as the default, and press YES to
enter this selection into memory.
Document Scan Settings
SCANNING&PRINTING?
YES / or 1-5
2 SCAN CONTRAST?
OK=YES
LIGHT *NORMAL DARK
-SELECT&PUSH"YES"-
SCANNING&PRINTING?
YES / or 1-5
3 PRINT DENSITY?
OK=YES
DARK
-SELECT&PUSH"YES"
LIGHT
4 - 14