NEC NEFAX655e Manual page 78

Dial Registration
Speed Dial keys
The fax number and other data for a particular destination can be programmed using a 3-
digit Speed Dial Number. This feature allows you to transmit a document to the
particular destination by pressing the Speed Dial key, entering the 3-digit number and
pressing the Start key. You can program a fax number in any of the 100 Speed Dial
locations, numbers 001 to 100.
Entering
Edit/Deleting
4 - 19
1
Press the Program key and scroll through the
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
2
Press 2 or scroll down to the Speed Dial menu and
press YES.
3
Enter the number of the location you want to
program and press YES.
4
Enter the Telephone number you wish to transmit
to and press YES after checking to see if it is OK.
5
Enter the Name you wish associated with this
number and press YES after checking to see if it is
OK.
6
You are given the opportunity to program additional locations. Continue to enter additional
Speed Dial locations or press NO to exit.
1
If you wish to change any entry, a screen allows you to accept it or change it.
2
If you wish to change a Key that was previously
programmed, this message appears. Press YES to
keep this location as is, or NO if you wish to edit it.
3
If you choose NO, use the arrow keys to select
either EDIT or DELETE and then proceed with the
needed changes.
DIAL REGISTRATION?
YES / or 1-6
2 SPEED DIAL?
OK=YES
SPEED DIAL =_
OK=YES
OK=YES
NAME=_
OK=YES
REGISTERED! KEEP?
OK=YES (EDIT/DEL=NO)
EDIT *DELETE
-SELECT&PUSH"YES"-
Facsimile Programming