NEC NEFAX655e Manual page 83

Batch TX
You can program your single location One-Touch key to automatically batch
documents. By assigning a batch time to a programmed One-Touch key, you can
eliminate repeated calls to the same number throughout the day. Your unit calls the
remote unit at a preset time and transmits all documents stored in memory for this
particular destination in one phone call.
Entering
Edit/Deleting
Facsimile Programming
3
If you choose NO, use the arrow keys to select
either EDIT or DELETE and then proceed with the
needed changes.
1
Press the Program key and scroll through the
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
2
Press 5 or scroll down to the Batch TX menu and
press YES.
3
Press the One-Touch key you wish to use.
4
Enter the time at which the batch should be
transmitted and press YES to accept.
5
This screen confirms your entry.
6
Press the Start key to enter this information into
memory, or press NO to exit.
1
If you wish to change any entry, a screen allows you to accept or change.
Dial Registration
EDIT *DELETE
-SELECT&PUSH"YES"-
DIAL REGISTRATION?
YES / or 1-6
5 BATCH TX?
OK=YES
-SELECT REGIST.KEY-
ONE-TOUCH 25
TX TIME=_0:00
OK=YES
*SET ONE-TOUCH 25
23:00*
-SELECT REGIST. KEY-
(COMPLETE=NO)
4 - 24