Specifying The Setting For "Program Dial" (Only For Nefax691) - NEC NEFAX 671 User Manual

7.6 Setting Up the Fax Registration

Specifying the Setting for "PROGRAM DIAL" (Only for NEFAX691)

If one-touch dial keys have been programmed with fax numbers and a
transmission/reception function, that function can be carried out by pressing just the
corresponding one-touch dial key.
* This function is only available for NEFAX691
Transmission/reception functions that can be programmed:
G Broadcast transmission
G
Timer transmission
G
Mailbox transmission
G Polling reception
G
Relay initiation transmission
To set program dialing
1
Select the "FAX REGISTRATION".
H Refer to "Setting Up the Fax Registration" on page 7-28.
2
Press the [4] key from the 10-Key
Pad to select "PROGRAM DIAL".
3
Press the one-touch dial key ([61]
through [64]) programmed with the
desired function.
4
From the 10-Key Pad, press the
key ([1] through [3], [6] or [7]) for
the desired function.
H Functions that can be
selected:
1 BROADCAST
2 TIMER TX
3 MAILBOX TX
6 POLLING RX
7 RELAY INITIATE
5
Follow the instructions for the selected function.
7
7-41