Table of Contents
Advertisement
5
To fax using program dialing (Only available for NEFAX691)
If one-touch dial keys have already been programmed with fax numbers and a
transmission/reception function (such as timer transmission or polling reception),
that function can be carried out by pressing just the corresponding one-touch dial
key.
For details on setting program dialing, refer to "Specifying the Setting for
"PROGRAM DIAL" (Only for NEFAX691)" on page 7-41.
1
Press the [Fax] key to enter Fax mode.
2
Load the document into the Automatic Document Feeder. (This step is not
necessary with polling reception.)
3
If necessary, change the "Resolution" setting (p. 5-12). (This step is not
necessary with polling reception.)
4
Press the one-touch dial last four
keys programmed with the desired
function.
H
NEFAX691: [61] through [64]
5
Press the [Start] key.
The programmed function
automatically begins.
Tip
To cancel a timer transmission, select "CANCEL RESERV." from the
"FUNCTION" menu (p. 6-19).
5-8
5.1 Dialing
64
Advertisement
Table of Contents
