NEC IT3510 Operation Manual page 320

Issue 1
4 - 46
Setting for TSI Style:
1. Select [TX 2], then touch
[TSI].
2. Select the key for
attaching the TSI
information as the initial
value, then touch
[Enter].
The TSI is required on all
facsimile transmissions.
It is illegal to turn off this
feature.
Setting for the TX Marker (option):
1. Select [TX 2], then touch
[TX Marker].
i
[TX Marker] is displayed
only when the optional
TX Marker for
transmission is installed.
2. Select the key for the
marking position to be
set as the initial value,
then touch [Enter].
Refer to Section 2.10
Using the TX Marker in
Chapter 6 Advanced
Sending and Receiving
Operations on page
6-19.
Advanced Registration and Setting Operations
NEC IT Series