NEC IT3510 Operation Manual page 133

NEC IT Series
NEC IT3510/IT2510 Operations Manual
Copying with the Manual Bypass Tray (Continued)
7.
Load a sheet of paper onto the
Manual Bypass Tray.
1. Open the Manual Bypass
Tray.
2. Place a sheet of paper on
the tray.
3. Adjust the guides to the
paper width.
4. Insert the paper until the
paper stops.
i
Observe the following:
• Set the document pages face down.
• Set the
accordance
direction of the selected paper.
• Load single sheets of paper at a
time.
• Do not use wrinkled, folded, or damp
paper.
• Avoid using paper that has been
printed on one side. This can lead to
paper jamming.
• Try to insert the paper slightly deeper
once the paper hits the end.
• If a large sheet of print paper is being
used, support the loose end by hand,
to prevent it from falling out.
• When a postcard or thick paper stock
is used, straighten out the shape
before inserting onto the tray.
• When thick paper, OHP paper,
postcards, or labels are used for
copying, do not select any of the
2-Sided Copying, Booklet, Stapling,
or Holepunching functions.
8.
Copying will now begin.
i
To copy two or more sheets:
Consecutive copying is possible
by setting the appropriate amount
of paper on the Manual Bypass
Tray.
original document in
with the size and
Issue 1
2 - 11