2-Sided Transmission - NEC IT3510 Operation Manual

NEC IT Series
2.9
NEC IT3510/IT2510 Operations Manual
2-TO-1 Transmission
1.
Load the document in the ADF in
the portrait direction.
2.
Press <FAX/MAIL>.
3.
Select [Set 1] from [FAX Menu],
and touch [2-TO-1].
4.
Select the destination.
5.
Press <Start>. Transmission
now begins.

2-Sided Transmission

This feature allows a two-sided page to be scanned and transmitted.
Before Starting Operations:
The optional 2-Sided Document Feeder is required for automatic feeding.
Any document sent by using this feature can only be printed on one side of the paper
at the recipient's end.
Real-Time Transmission cannot be used with this feature.
The 2-Sided Transmission setting is reset after each transmission.
Issue 1
6 - 17