NEC IT3510 Operation Manual page 242

Issue 1
3 - 48
Registering Users (Continued)
2. Touch the TSI print position
desired, then touch [Enter].
Setting the TX Marker Position (optional):
1. Select [TX2], then touch [TX
Marker].
i
[TX Marker] is displayed only
when the optional TX Marker is
installed.
2. Touch a key for the TX Marker
position to be set as the initial
value, then touch [Enter].
Refer to Section 2.10 Using the
TX Marker in Chapter 6
Advanced Sending and
Receiving Operations on page
6-19.
Setting the TX Report:
1. Select [Output], then touch [TX
Report].
NEC IT Series
Registration and Setting Operations