NEC IT3510 Operation Manual page 429

NEC IT Series
This mode cannot be
selected with the
Duplexing mode.
This mode cannot be
selected with the
Exclusive Paper mode.
Please remove all
copies in the non-sort
tray.
Please remove the
original in the
Document Feeder and
place the original in the
SADF.
This application cannot
be changed now.
Select Interrupt mode
to change the
application.
Return the following
number of originals to
the Document Feeder.
Cannot interrupt this
job; not enough free
memory. Press
<Start> to resume.
Original's size cannot
be detected. Reselect
the paper size.
NEC IT3510/IT2510 Operations Manual
Table 8-2 Alarm Messages (Continued)
Messages
A paper cassette with
paper that cannot be
copied on both sides
is selected after
2-Sided Copying is
selected.
Stapling or 2-Sided
Copying is selected
after a cassette with
thick paper or OHP
sheets is selected.
Paper remains in the
non-sort tray.
The document is set
on the Single Feed
Tray, while
documents remain in
ADF.
<FAX> is pressed
while the copying
function is active.
A paper jam has
occurred while using
the ADF for copying.
<Interrupt> is
pressed, but
interruption is
unavailable because
the memory capacity
is insufficient.
The document size
could not be detected
with the automatic
paper mode.
Causes
Reselect the paper.
Cancel 2-Sided Copying.
Cancel the stapling or 2-Sided
Copy function.
Reselect the paper.
Remove all paper from the non-
sort tray.
Place the document in the
Single Feed Tray after removing
the document from the ADF.
Press <Interrupt> to stop
copying, then press <FAX>.
Return the indicated number of
pages to the ADF.
Press <Start> to restart the
copying operation prior to
interruption.
Select the paper size.
Issue 1
Countermeasure
8 - 5