Using Copy Programs - NEC IT3510 Operation Manual

Issue 1
2.16
2 - 70
Using the 2-Sided Document Feeder for Separate Scanning (Continued)
4.
Press <Start>. The document
will now begin to scan.
i
To Suspend Scanning:
Press <Stop>.
touched during copying, copying starts.
5.
After scanning is complete, load
the next document page in the
feeder, then press [Continue].
i
Repeat this operation until the
whole document is completely
scanned.
6.
Touch [Finish] when all
scanning is completed.
7.
Press <Start>. Copying will now
begin.

Using Copy Programs

Copying functions used frequently can be registered and accessed as
necessary. For example, if you frequently use the same zoom and density
settings, these parameters can be registered into a key for convenient recall.
When [Finished] is
NEC IT Series
Copy Operations