NEC IT3510 Operation Manual page 319

NEC IT Series
NEC IT3510/IT2510 Operations Manual
Setting for the Communication Mode:
1. Select [TX 1], then touch
[Com. Mode].
i
[Com. Mode] is
displayed only when the
optional 2nd G3 Port is
installed.
2. Select the key for the
communications mode to
be set as the initial
value, then touch
[Enter].
Setting the Initial Status of the Transmission Method:
1. Select [TX 2], then touch
[TX].
2. Select the key for the
transmission method to
be set as the initial
value, then touch
[Enter].
Issue 1
4 - 45