Figure 1-13 Auto-Mode Screen - NEC IT3510 Operation Manual

NEC IT Series
NEC IT3510/IT2510 Operations Manual
Facsimile numbers registered for One-Touch keys
1~4 and copy program key 1 are displayed in this
zone.

Figure 1-13 Auto-mode Screen

When the 10-key Pad is used to enter a figure of four digits or more
Ë
(three digits for the IT2510), or a figure starting with '0', and <Start> is
pressed, the equipment automatically determines it to be a facsimile
number and begins transmission. When a three-digit number or less (a
two-digit number for the IT2510) is entered, the equipment determines
this the number of copies required and begins copying.
When <COPY> is pressed, the copy menu screen is displayed. To
Ë
select the copy function, press the <COPY> key.
When <FAX> is pressed, the facsimile menu screen is displayed. To
Ë
select the facsimile function, press the <FAX> key.
When the Auto-mode screen has been selected as the default screen,
Ë
pressing the <Panel Reset> key twice, while in the copy or facsimile
menu screens, will return you to the Auto-mode screen.
Issue 1
1 - 15