Operation Panel
The Operation Panel is used for entering information into the machine and for machine operation.
Operation Panel Names and Functions
Touch Panel
(1)
<Copy>
Press this key to copy. When this lamp is lit, the copy functions are available.
(2)
<Fax/Scan>
Press this key to send a facsimile, E-mail, or scan a document. When this lamp is lit, the facsimile or scanning
functions are available for use.
(3)
<Preset Scan> (Not supported for the machine)
Press this key to use the IP Scanner function.
(4)
<Utility/Counter>
Press this key for registration and to make settings.
(5)
<Mode Check>
Press this key to confirm the setting status of each function.
(6)
<Accessibility>
Press this key to activate accessibility settings.
For the Touch Panel, refer to
●
(4) Utility/Counter
(8) Contrast
(7) Enlarge Display
(6) Accessibility
(5) Mode Check
"Touch Panel" on page
(3) Preset Scan
(2) Fax/Scan
(1) Copy
(9) 10-key Pad
(10) C (Clear)
1-6
1-9.
(16) Rx Touch Lock
(17) Reset
(18) Auxiliary Power
Switch
(15) Access
(14) Interrupt
(13) Stop
(12) Start
(11) Power Lamp