NEC ViVid Office 2020 Quick Reference Manual page 39

(7) <Enlarge Display>
Press this key to enlarge the touch panel display.
(8) <Contrast>
Press this key to adjust light and shade contrast of the touch panel display.
(9) 10-key Pad
Press these keys to enter a facsimile telephone number, number of copies desired, or other data to be registered.
(10) <C> (Clear)
Pressing this key will reset the number of copies entered to "1". Pressing this key will also clear any data entered
when dialing a number or registering information.
(11) Power Lamp
When the power supply enters, it lights.
(12) <Start>
Press this key to begin copying, transmission of a facsimile, or reception of a facsimile after talking (manual
reception). Start is valid while the lamp is blue, and copying and transmission are available. When the lamp is
orange, copying and transmission are not available.
(13) <Stop>
Press this key to stop an operation, such as transmission or copying. This is not the same as using the Interrupt
key, which temporarily suspends an operation.
(14) <Interrupt>
Press this key to interrupt an operation in progress. The lamp will stay lit during the interrupt process.
(15) <Access>
Press this key to enable the account track mode or user authentication mode.
(16) <Rx Touch Lock> (Not supported for the machine)
Press this key to use the Rx Touch Lock function. When the Rx Touch Lock function is set, the lamp lights red. If
you receive a fax when this function is set, the lamp blinks green.
(17) <Reset>
Press this key to reset the settings.
(18) <Auxiliary Power Switch>
Press this button to turn ON/OFF the operation of the machine. The machine enters power saving mode when
turned OFF.
1-7
Operation Panel
1