Sanyo PJ-Net Organizer POA-PN30 Owner's Manual page 32

Table of Contents

Advertisement

Chapter 3 Basic Setting and Operation
2
Registering and deleting E-mail addresses
Type the E-mail address onto the Mail Address text
box and click Set button. To check the registered
addresses, click Mail Address Check & Delete sub
menu tab. The addresses are listed as the figure on
the right.
✐ Up to 10 E-mail addresses can be registered.
To delete the registered addresses, check the address
you want to delete and click Delete button.
3
Option selection for sending alert mail
Click Option sub menu tab. Check the condition
items under which alert mail will be sent and click
Set button.
Please refer to item "Examples :Type and contents of
alert mail" described on the next page.
[1]–––––––––––––––––––––––––––––––––––
When PJ lamp is off.
When the life span of lamp is reached.
When internal PJ power circuit is failed.
When internal PJ temperature is too high.
[2]–––––––––––––––––––––––––––––––––––
When PJ is turned off with power ON/OFF button.
When Power management function turns PJ
lamp off.
When the signal is interrupted.
–––––––––––––––––––––––––––––––––––
[3]
When accumulated lamp use time reaches [
hours.
Attached message
32
]
The length of message should be less
than 256 characters.
Up to 99,999 hours can be set for use time.
Check / Delete
Option

Advertisement

Table of Contents
loading

Table of Contents