Sanyo PJ-Net Organizer POA-PN30 Owner's Manual page 80

Chapter 6 Appendix
Operation
Q
Why can't I change the controls in the setting page with web browser?
A
Please make sure the projection monitor is turned on. If it is in the standby
mode, the setting is not effective to the projection monitor. To control the projec-
tion monitor with a web browser, the projection monitor must be in the pow-
ered-on condition. Also, projection monitors registered for multi-control cannot
have any controls changed if they are in standby mode. But timer and clock set-
tings are always effective, even for projection monitors in standby mode.
Q
Why does it sometimes take a lot of time to complete the page display?
A
The display speed of the page depends on the network environment in which
both the projection monitor and computer are placed. It may take much time to
complete the page display if network traffic is heavy. Please consult your net-
work administrator. You can select the Light mode for displaying pages quickly (☞
p.24).
Q
I use many of the projection monitors in the network. How can I use
names of the projection monitors to recognize each projection monitor
instead of IP addresses?
A
You can manage the projection monitors with nicknames instead of the IP address.
Please see item "Multi-Controls" for further information (☞ p.53).
By registering the projection monitor name and IP address with the DNS server,
it can be accessed with the nickname from the any computer referred to the
DNS server. Please consult your network administrator (☞ p.30).
Q
How many numbers of the E-mail address can I register in the E-mail
setting page?
A
You can register up to 10 addresses.
80