Initial Setting
Power & Status
PC Adj.
Control
Setting
E-mail Setting
Save
Network
Multi Control
Timer
Information
SNMP Setting
Save/delete the settings
1
Click Save sub menu on the main
menu.
2
Select a set number (Totalsave1 to
Totalseve20) you intend to store
current settings with the pull-down
menu button of the item Set of Save
& Delete. Name this set number
onto the Memo text area.
* Up to 18 characters can be used for the
Memo.
3
Click Save button to store the cur-
rent setting and name into the
selected set number.
To remove the saved setting, select
the set number with pull-down menu button and then click Delete button.
You can store up to 20 (Totalsave1 to Totalseva20) sets of settings into the Network Unit.
✐
Save the controls and settings
This page is to save and load the controls and settings of
the projection monitor in the block. The storable items are
"PC adjustment", "Control" and "Setting".
Save the controls and settings
Select a set
number
Type a memo
for the selected
set number
PJ-NET ORGANIZER
OWNER'S MANUAL
47