Chapter 4 Controlling the Projection Monitor
2
Set an execute time
Type the time with (Hour:Minute) and 24 hours format.
Ex.: Type [18:25] if you specify [PM 6 o'clock and 25 minutes].
3
Select an event action
Select an event action from the pull-down menu.
Event
ON......................Turns on the projection monitor
OFF ....................Turns off the projection monitor
4
Register an event
Click Entry button to register the set timer event. Repeat steps 1 to 4 for another
timer event setting.
Check the timer events
To check the set timer events, click Check button. The
timer event lists are listed. The event with gray repre-
sents the timer-OFF event.
Change the event mode
On the event list appearing by clicking Check but-
ton, click on the event you want to delete, disable or
enable. Click Cancel, Delete, Timer ON or Timer OFF
button on the popup pallet.
Button
Cancel ...............Cancels the setting
Delete ................Deletes the timer event
Timer OFF .........Disable the timer event temporarily
Timer ON ...........Enable the timer event
50
Action
Operation