Table of Contents
Advertisement
Initial Setting
Power & Status
PC Adj.
Control
Setting
E-mail Setting
Save
Network
Multi Control
Timer
Information
SNMP Setting
SNMP information setting
Trap setting
The SNMP agent provided with this product is based upon MIB-2 defined by RFC1213. For private
✐
MIB information, refer to file "Mibinfo/monitorPjNet.mib" in the CD-ROM.
SNMP setting
This product provides a SNMP (Simple Network Management
Protocol) agent function. The SNMP consists of a manager
and agents. The group which communicates information
each other with SNMP is called "Community". There are two
access modes in a community, Refer (read only) and Set
(read- write). This product allows to use Refer (read only) only.
The SNMP message informs the projection monitor status to
an administrator is called "Trap". Click SNMP Setting on the
main menu and set up each item.
PJ information
Item
Description
Contact ..............Enter user name of the projection monitor etc.
(optional)
Place..................Enter place of the projection monitor (optional)
Community
name(refer)........Enter community name (read only). Default name
is "public".
Trap
Item
Description
Community name ...Enter community name to send "Trap". Default
name is "public".
Trap address......Enter IP address of the SNMP manager computer
to receive "Trap".
SNMP setting
35
PJ-NET ORGANIZER
OWNER'S MANUAL
Advertisement
Table of Contents
