Table of Contents
Advertisement
5.
Selected number of clips
Indicates the number of selected clips and the total
number of clips.
6.
Time display
One of the following data is displayed: the TC (time
code)/UB (user bit) at the start of clip recording/time of
shooting/day of shooting/date and time of shooting/
clip name/the user clip name/slot number.
(➝ "Changing Thumbnail Display" page 12)
7.
Thumbnail
Shows the thumbnails recorded for each clip. The
EXCH.THUMBNAIL function allows you to replace this
thumbnail.
(➝ "Changing Thumbnail Display" page 12)
8.
Clip no.
Indicates the numbers assigned to P2 card clips,
which are normally assigned starting in order from the
earliest shooting date. Numbers of clips that cannot be
played back are shown in red. You can change the
order clips appear using the display selected clips or
the SORT function.
(➝ "Changing Thumbnail Display" page 12)
9.
Shot mark indicator
Indicates that a shot mark has been attached to a clip.
10.
Proxy indicator
Indicates clips that contain a proxy video attached by
the AG-HPX370 Series, AJ-HPX3100 or other camera.
◆ NOTE:
• This unit cannot record proxies.
11.
Text memo indicator
Indicates a clip that contains text memo data.
12.
Edit Copy indicator
Indicates an edit-copied clip.
13.
Wide indicator
Indicates a clip recorded in the 16:9 aspect ratio. This
is not indicated for an HD format clip.
14.
Incomplete clip indicator
Indicates a clip spanning multiple P2 cards where one
of the cards that contain part of the clip has not been
inserted.
15.
Bad clip
Unknown clip indicator
Indicates a clip that became defective because the
power was shut down during recording or was
damaged for some other reason. Clips with the yellow
bad clip(
)
indicator can sometimes be repaired.
(➝ "Repairing bad clips" page 19)
Clips with the red clip indicator
repaired and should be deleted. If deleting is not
16.
17.
18.
cannot be
(
)
possible, format the P2 card.
Instead of
,
appears to indicate that a clip is not
in the P2 standard format.
Indication of P2 card slot and storage device status
The status of P2 card and storage device connections
are indicated as shown below.
1 1
6
2
–
The numbers of P2 card slots that contain
(White)
a P2 card are indicated in white.
1
The number of the P2 card slot of the P2
(Yellow)
card that contains the clip at the cursor
position is indicated in yellow. When a clip
spans multiple P2 cards, the numbers of
all the slots housing cards that contain the
clip are indicated.
◆ NOTE:
A slot number with a pink frame indicates either
of the following conditions for an inserted P2
card.
• "RUN DOWN CARD"
The maximum number of overwrites has been
exceeded.
• "DIR ENTRY NG CARD"
The P2 card directory structure does not
conform to standard specifications.
Grey indicates that a storage device is not
connected.
(Gray)
White indicates that a storage device is
available.
(White)
Yellow indicates that clips on a storage
device appear as thumbnails.
(Yellow)
Red indicates that a storage device is
connected but is not available.
(Red)
Status message
Shows messages indicating processing status. For
example, screen updating shows an "UPDATING" text
message and a rotating
Simple property display
Displays the properties of clips at the cursor location.
A menu allows you to select the information that will
appear.
(➝ "Selecting items to be displayed as properties" page
14)
Main Mode: Thumbnail Screen
icon.
11
Hide quick links:
Advertisement
Table of Contents
