Table of Contents
Advertisement
Display
No
Character code
70
DIR NG CARD<
71
RUNDOWN CARD<
60
HDMI MONI NOT ACCEPT
62
SLAVE WARNING
63
SYNC POSI FAILED
64
INPUT L / R MISMATCH
65
REF IN NOT DETECT
86
For Long and Trouble-Free Operation: Warning and Error Messages
The directory configuration is incorrect. Immediately back up card data and format
>
the card before using it again.(
occurred.)
The card has been rewritten the maximum number of times. Replace the P2 card.
>
(
indicates the slot number where the error occurred.)
Displayed when the HDMI monitor cannot accept the machine's 3D output video.
Use an HDMI monitor that accepts 3D video, or change the machine's settings to suit
the monitor's capabilities.
A problem on the slave side prevented operation. Check status on the slave side.
Failed to synchronize clip location. Check the number and type of clips. If the
reference signal or input signal is corrupted during playback of a 3D clip, it may not
be possible to synchronize positions on the clip.
Press the STOP button to stop, check connections and input signals before restarting
playback.
SDI input L/R signals and connected input connectors do not match. Check
connections and input signals.
The reference signal could not be detected. Check connections and input signals.
Recording and playback cannot be started when this message is displayed.
Description
indicates the slot number where the error
Deck operation
Operation
continues
Operation
continues
Operation
continues
STOP
Operation
continues
Operation
continues
STOP
Operation
continues during
playback and
recording
Hide quick links:
Advertisement
Table of Contents
