Panasonic AG-HPD24P Operating Instructions Manual page 52

Item
Restores clips that have been damaged by sudden power outages
during recording or by other causes and are marked by the bad clip
indicator (yellow
REPAIR CLIP
NOTE:
• Some clips are so badly damaged they cannot be repaired.
Bad clips that are beyond repair are indicated by a red
indicator (
Use the RECONNECTION function to rejoin continuous clips that
span across multiple P2 cards but are not recognized as
continuous clips and are indicated by the incomplete clip indicator
( ).
NOTE:
Incomplete clips occur under the following conditions.
• When the individual clip segments on each P2 card that make
up the clip are copied separately.
RE-
• When the segments of a continuous clip that are recorded on
CONNECTION
multiple cards are separately copied to a storage device and
then copied back to a P2 card.
• When a DVCPRO HD or AVC Intra100 clip that is 5 minutes or
longer (10 minutes or longer for a DVCPRO50 or AVC Intra50
clip, and 20 minutes or longer for a DVCPRO/DV clip) is copied
to a storage device and later written back to a P2 card.
• When some but not all the clip segments in a clip that consists
of three or more clip segments are reconnected, the
incomplete clip mark (
Copies selected clips to a P2 card in a P2 card slot or to a storage
device.
NOTE:
COPY
• Take care not to turn off the power or remove/insert a card
during copying. Otherwise the copied clip may become bad. If
the copied clip goes bad, delete it and make a new copy.
• Reconnect incomplete clips before copying.
Replaces a clip thumbnail with images to which text memos have
been attached. This function is available when a text memo clip is
EXCH.THUMB
displayed.
NAIL
Sets and changes the names of storage partitions.
NOTE:
CHANGE
• Displayed only when storage EXPLORE is open.
PARTITION
• The date when the partition was created is the default partition
NAME
name.
• Enabled only for TYPE S storage devices.
Deletes the last partition on a storage device.
NOTE:
DELETE LAST
• Deletion is enabled only when the cursor is in the last partition.
PARTITION
• Displayed only when storage EXPLORE is open.
52
Setup Menu: Menu items
Settings and brief function description
).
).
) will remain.
SYSTEM FREQ
indications
(Main)
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23 Hz 60-24 Hz
Mode
2D SYNC
3D
PB
M M
M
M
M M
M
M