Fujitsu CELSIUS W380 Operating Manual page 34

Troubleshooting and tips
Cause
Wrong monitor has been set under
Windows 2000
Wrong monitor has been set under
Window XP
Wrong monitor has been set under
Window 7
The wrong RAM memory modules
have been inserted.
26
Troubleshooting
► Restart the device.
► If the message Starting Windows appears, press
function key F8
The Windows 2000 Advanced Options Menu appears.
► Select Safe Mode or Safe Mode with Network.
► Set the correct values for the attached monitor as
described in the operating manual of the monitor by
selecting Start - Settings - Control Panel - Display -
Settings.
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu or the
menu for selecting the operating system appears.
► If the menu for selecting the operating system
appears, press F8 .
► Select Safe Mode or Safe Mode with Network.
► Set the correct values for the connected monitor as
described in the operating manual of the monitor by
selecting Start - Settings - Control Panel - Display and
then the Appearance, Themes, Settings tabs.
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu or the
menu for selecting the operating system appears.
► If the menu for selecting the operating system
appears, press F8 .
► Select Safe Mode or Safe Mode with Network.
► Select Start - Control Panel - Appearance and Themes -
Display to set the correct values for the connected
monitor, as explained in the monitor instructions.
► See the manual for the mainboard for information on
which memory modules can be used.
Fujitsu Technology Solutions