Switching On Monitor And Device - Fujitsu CELSIUS W380 Operating Manual

Preparing for use

Switching on monitor and device

► Switch the monitor on (see the operating manual for the monitor).
► Switch the device on. To do this, follow the instructions below.
Depending on the version, the device may be equipped with a main power switch on the
i
back of the device in addition to the ON/OFF button on the right hand side. As a result,
there are different ways to switch on the two variants.
Switching on the device (with main power switch)
0 = Device is off
► Switch the device on with the main power switch (1) on the back of the device.
► Press the ON/OFF switch (2) on the right hand side of the device.
The device starts.
12
1
I = Device is ready-to-operate
I
0
Fujitsu Technology Solutions