Monitor Remains Blank - Fujitsu CELSIUS W380 Operating Manual

Monitor remains blank

Cause
Monitor is switched off.
Power saving has been activated
(monitor is blank).
Brightness controls set to dark.
Power cable is not connected.
Monitor cable is not connected.
Fujitsu Technology Solutions
Troubleshooting
► Switch your monitor on.
► Press any key on the keyboard.
or
► Deactivate the screen saver. If necessary, enter the
appropriate password.
► Adjust the brightness control. For detailed
information, please refer to the operating manual
supplied with your monitor.
► Switch off the monitor and the device.
► Check that the monitor power cable is properly
connected to the monitor and to a grounded mains
outlet or to the monitor socket of the device.
► Check that the device power cable is properly
plugged into the device and a grounded mains
outlet.
► Switch on the monitor and the device.
► Switch off the monitor and the device.
► Check that the monitor cable is properly connected
to the device and monitor.
► Switch on the monitor and the device.
Troubleshooting and tips
25