Panasonic UF-9000 Service Handbook page 105

4.2.8. Service Mode 9 (System Maintenance)
4.2.8.1. Overview
This Service Mode is used to maintain the machine. Use the following procedure for System Maintenance.
Press the "V", "/\" arrow keys to select the "9: System Maintenance" on the display.
↓
Press the "SET" key to select the "8: Send RCV'D File". The display changes to the Fax Mode.
↓
Select the desired Fax number.
↓
Press "START" to send the Fax.
After the transmission, the machine returns to the Stand-by Mode.
Note:
If there is NO File in the machine, this operation will not function.
Press the "STOP" key twice to exit the service mode.
No. Maintenance Mode
08 Send RCV'D File
Ver. 2.0
System Maintenance Table
Transfers documents from memory to another fax machine
during a fatal printer error.
105
Description
UF-9000
DP-180/190
JUN 2004