Table of Contents
Advertisement
Programming One-Touch (Option 1)
Multifunction buttons can be set up to automatically dial numbers. (up to 30
digits each).
The numbers that can be programmed are any of the following:
1. Standard telephone numbers, including the outside line access code
(usually 9) if required.
2. Special codes such as a personal ID number or a voice mail access
code, including * and #.
3. A combination of a standard telephone number plus one or more
special codes, with pauses between the elements to allow for system
response time.
To program a multifunction button for a One-Touch number, follow these
steps:
1. Press OPTIONS, numeric key "1", then ENTER.
ONE-TOUCH
SELECT ASSIGN KEY
The indicators for previously assigned one-touch buttons will be green.
The indicators for buttons assigned to Directory Numbers, Call Appearance,
and features will be red. The buttons with red indicators cannot be
programmed for One-Touch dialing.
2. Press the unassigned button desired to be used as a One-Touch button.
ENTER DIRECTORY NUMBER
DN=
The multifunction button' s number is at the far right of the second line. In
this example, the button number is 16.
3. To program a standard telephone number or a special code, press the
keypad digits for the number desired. Include the outside access code
(such as 9) and area code for long distance. The digits show on the
second line.
ENTER DIRECTORY NUMBER
DN=912229876543
To correct an error, press CLEAR to re-enter the number.
Note:
No pause is needed between the outside access code and the number to be
dialed.
(16)
(16)
3
3-3
Advertisement
Table of Contents
