Call Log (Option 4) - Fujitsu SRS-12i User Manual

Call Log (Option 4)

This feature allows users to support Call Log service to all multifunction keys
or selected keys, or not support at all.
1. Press OPTIONS, numeric key "4", then ENTER.
Note:
3
If ALL (default) is previously set, all feature buttons light green.
2. Press ENTER.
3. There are three selections:
1. ALL – Support call log to all keys.
2. SELECT – Support call log to selected keys.
3. NO SUPPORT – Support no call Log.
Press numeric key of your selection and ENTER.
4. If 1: ALL or 3: NO SUPPORT is selected, the LCD will display as below:
or
If 2: SELECT is selected, follow the steps below:
Only Call Appearances with lit LEDs will log Incoming and Unanswered
calls. Press the buttons to turn the LEDs on or off to select the Call
Appearances desired to log incoming and unanswered calls.
Press ENTER to complete.
Press either asterisk (*) to go back to sub-menu or OPTIONS to exit the option
menu.
3-10
CALL LOG SERVICE MODE
SUPPORTED (ALL)
1: ALL
3: NO SUPPORT
SUPPORTED
COMPLETED
NON SUPPORTED
COMPLETED
SUPPORTED (SELECT)
SELECT ASSIGN KEY
SUPPORTED (SELECT)
COMPLETED
2: SELECT
(SELECT 1-3)