Table of Contents
Advertisement
Or, press 2 for the silent ring option, then ENTER. The following screen
is shown:
SILENT
COMPLETED
Press either asterisk (*) to go back to sub-menu or OPTIONS to exit the option
menu.
Selecting Ringer Pattern Mode
This selection determines the type of ring that announces incoming calls
when in an active state; for example, talking on a line, on hold, viewing Call
Log, viewing Address Book, or viewing the option menu. This feature allows
for the selection of an audible ring, that is roughly 50% softer than the
normal ringer volume. The user has the option (either default or selected),
to announce an incoming call while talking on another line.
Mute Ring: Normal ring cycle
One Ring: One ring cycle
To select the ringer pattern mode, enter Ringer Service Mode then follow
steps below:
1. Press numeric key "4", then ENTER.
RINGER PATTERN MODE
MUTE RING
2. Press ENTER.
1: MUTE RING
3. Press the desired option, then ENTER.
MUTE RING
COMPLETED
or
ONE RING
COMPLETED
Note:
When "SILENT" is selected in the Ringing Mode selection, One Ring and
Mute Ring are invalid.
2: ONE RING
(SELECT 1-2)
3
3-15
Advertisement
Table of Contents
