Fujitsu SRS-12i User Manual page 37

If no telephone numbers have been programmed in, the Call Announce
Intercom feature is disabled, and the screen displays NON SUPPORTED.
To program the first number and enable Call Announce Intercom, go to
step 2.
2. Press ENTER.
3
1: ONE WAY – speaker is activated on the recipient' s set, but the
microphone is off.
2: TWO WAY – both speaker and microphone are active.
3: TURN OFF – intercom feature is disabled.
3. Press 1 or 2, then ENTER. A screen appears showing your choice and
prompting for an authorized Directory Number:
4. Input the directory number of the call screener exactly as it appeared
on the display of your set when the call screener placed the earlier call.
Example: 919 790-2222 or 9197902222
Press the asterisk (*) key for spaces and dashes (like the space between
the first 9 at the end of the area code and the 7). Example:
919*790*2222
The screen should now appear as follows:
Press ENTER, and the screen will display the intercom mode and number
entered.
5. Press OPTIONS to return to standard display.
3-18
INTERCOM FEATURE
NON SUPPORTED
1: ONE WAY
3: TURN OFF
TWO WAY SELECTED
ENTER TELEPHONE NUMBER
TWO WAY SELECTED
919*790*2222
TWO WAY TURNED ON
919*790*2222
11:45AM MON FEB18
2: TWO WAY
(SELECT 1-3)
(1)
(1)
(1)
(1)