Operation Flowchart - Panasonic KT4H User Manual

6.4 Operation flowchart

This instrument has been classified into the following modes and setting items.
Control output OFF/Manual control
[Main setting mode](p.13)
SV
[1]
SV2
[2]
SV3
[3]
SV4
[4]
[
Key operation]
• + : Press
• + (Approx.3sec) : Press
• + ( Approx.3sec) : Press
• : This means that if
and the controller proceeds to the next setting item.
• Setting items with dotted lines are optional, and they appear only when the options are added.
• Numbers such as [1], [2], etc. are setting item numbers.
PV/SV display mode (Automatic control)
Control output OFF
(Approx. 1sec)
Auto/Manual control
+
[Sub setting mode](p.14) [Auxiliary function setting mode](p.16)
Auto-tuning/
Auto-reset
[5]
OUT1
proportional
[6]
band
OUT2
proportional
[7]
band
Integral time
[8]
Derivative time
[9]
ARW
[10]
OUT1
proportional
[11]
cycle
OUT2
proportional
[12]
cycle
Alarm 1 value
[13]
Alarm 2 value
[14]
Heater burnout
alarm value
[15]
Heater burnout
alarm 2 value
[16]
key while pressing key.
key for 3 seconds while pressing
key for 3 seconds while pressing
key is pressed, the set value is saved,
For 3 seconds after power on, the PV display indicates the
Power ON
input type, and the SV display indicates input range high limit
value (thermocouple, RTD input) or scaling high limit value
(DC voltage, current input).
+ (Approx. 3sec)
[Setup mode] (p.18)
Set value
lock
[17]
Sensor
correction
[18]
Communication
protocol
[19]
Instrument
number
[20]
Communication
speed
[21]
Data bit/Parity
[22]
Stop bit
[23]
Communication
response time
[24]
key.
key.
12
Output MV indication
(Approx. 3sec)
+ (Approx. 3sec)
Input type
[25]
Scaling high
limit
[26]
Scaling low
limit
[27]
Decimal point
place
[28]
PV filter time
constant
[29]
OUT1 high limit
[30]
OUT1 low limit
[31]
OUT1 ON/OFF
action hysteresis
[32]
OUT2 action
mode
[33]
OUT2 high limit
[34]
OUT2 low limit
[35]
Overlap/Dead
band
[36]
OUT2 ON/OFF
action hysteresis
[37]
Alarm 1 type
[38]
Alarm 2 type
[39]
Alarm 1
Energized/
[40]
Deenergized
Alarm 2
Energized/
[41]
Deenergized
Alarm 1
hysteresis
[42]
Alarm 2
hysteresis
[43]
Alarm 1 action
delayed timer
[44]
Alarm 2 action
delayed timer
[45]
SV rise rate
[46]
SV fall rate
[47]
Direct/Reverse
control action
[48]
AT bias
[49]
Contact input
function
[50]
Output status
selection when
[51]
input abnormal
OUT/OFF key
function
[52]
Backlight
[53]
PV color
[54]
PV color
range
[55]
Backlight time
[56]