Toshiba e-Studio 332s Quick Start Manual page 107

2
Hold down the power switch for
approximately one second to turn off the
power. And turn off a computer.
3
Plug one end of the Ethernet cable into
the network interface connection on the
back of the machine.
4
Plug the other end of the Ethernet cable
into the hub.
5
Hold down the power switch for
approximately one second to turn on the
power.
6
Press the <SETTING> key on the
operator panel.
7
Press the
press .
OK
8
Enter the administrator password.
The factory default password is "aaaaaa".
- 107 -
Printing from a Computer
to select [Easy Setup], and
5