Step 2 Configuring The Settings For Tray 1 - Toshiba e-Studio 332s Quick Start Manual

Installing Your Machine
4
Flex paper back and forth, and then fan
1
it. Straighten the edges of the paper
stack on a level surface.
5
Load paper with the print side face
down.
Note
● Do not load paper above the fill line (3).
6
Push tray 1 until it stops.
Step 2 Configuring the Settings for
Tray 1
1
Press the <SETTING> key on the
operator panel.
3
[ ▼ ▼ ▼ ]
- 24 -
2
Press the to select [Paper Setup] and
then press .
OK
3
Check that [Tray 1] is selected and then
press .
OK
4
Check that [Paper Size] is selected and
then press .
OK
5
Press the to select the size of the
loaded paper and then press
Reference
● If [Custom] is selected for [Paper Size], you need
to register the custom size. For how to register the
custom size, refer to the User's Manual (Basic) > "1.
Setup" > "Loading Paper and Documents" > "Paper"
> "Loading Paper" > "Registering Custom Sizes".
6
Press the to select [Media Type] and
then press .
OK
7
Press the to select the type of media
loaded and then press
8
Press the to select [Media Weight]
and then press
OK
9
Press the to select the weight of the
loaded paper and then press
10
Press the until the top screen is
displayed.
.
OK
.
OK
.
.
OK