Toshiba e-Studio 332s Quick Start Manual page 86

Scanning to Local PC
6
Press the <SETTING> key on the
operator panel.
7
Press the to select [Easy Setup], and
press .
4
OK
8
Enter the administrator password.
The factory default password is "aaaaaa".
a
Press , ,
character you want, and then
press .
OK
- The selected character is entered as "*" in
the text field.
- If you have entered an incorrect value,
press the <CLEAR> key and then enter
the correct value.
b
Repeat step
required are entered.
, to select the
a
until all characters
c
Press the
and press
9
Press the
Setting], and then press the .
10
If setting the IP address manually, check
that [Manual] is selected, and press
If obtaining the IP address automatically, press
the to select [Auto], and press
step 15.
11
Enter the IP address using the ten-key
pad, and press
To move to the next box, press the
12
Enter the subnet mask using the ten-key
pad, and press
To move to the next box, press the
13
Enter the default gateway address using
the ten-key pad, and press
To move to the next box, press the
- 86 -
and to select [Enter]
.
OK
to select [Network
. Proceed to
OK
.
OK
.
.
OK
.
.
OK
.
.
OK