Toshiba e-Studio 332s Quick Start Manual page 111

12
Check that your machine is displayed
in [Printers] and [TOSHIBA
e-STUDIO403S(PS)] or [TOSHIBA
e-STUDIO403S(PCL)] is displayed in
[Kind].
Note
● If [TOSHIBA e-STUDIO403S(PS)] or [TOSHIBA
e-STUDIO403S(PCL)] is not correctly displayed
in [Kind], click [-] to remove your machine from
[Printers] and then redo the procedure from step 8
to 12.
13
Close [Print & Scan] (For Mac OS X
10.5 and 10.6: [Print & Fax]).
14
Remove "Software DVD-ROM" from the
computer.
The installation is complete.
◆ Print a test page to check that the printer
driver is successfully installed on the
computer.
1
From the [Go] menu, select
[Applications] > [TextEdit].
2
Select the [File] menu > [Print].
3
Select the name of your machine from
[Printer].
4
Click [Print].
◆ For Mac OS X 10.4.0 to 10.4.11
Memo
● The following procedure uses Mac OS X 10.4.11 as an
example. The description may be differ depending on the
OS.
1
Check that your machine and the
computer are turned on and connected.
2
From the Apple menu, select [System
Preferences].
3
Select [Network].
4
Select [Network Port Configurations]
from [Show], and then check that
[Built-in Ethernet] is selected.
5
Close [Network].
6
Insert "Software DVD-ROM" into the
computer.
7
Double-click the [TOSHIBA] icon on the
desktop.
8
Double-click [Driver] folder > [PS]
or [PCL] folder > [Installer for Mac
OSX].
Follow the instructions displayed on the screen to
complete the installation.
9
From the [Go] menu, select [Utilities]
and then double-click [Printer Setup
Utility].
Note
● If [Printer Setup Utility] is already running, close it
once and reopen.
10
Click [Add].
If the [You have no printers available] dialog
box is displayed, click [Add].
- 111 -
Printing from a Computer
5