Toshiba e-Studio 332s Quick Start Manual page 49

8
On the [Pre-Installation Check] dialog
box, click [Next].
9
Click the [Easy Installation
(Network)] button.
The device search starts.
- If the machine is detected, it is
automatically installed. Proceed to step
12.
- If the machine is not detected, the
[Review your installation settings.]
screen is displayed. Proceed to step 10.
10
Click [Restart search] to restart the
device search.
After the machine is displayed, select the machine
and click [Next].
Memo
● If the machine is not displayed by clicking [Restart
search], select [Printer name/IP Address] and
enter the IP address assigned to your machine, and
then click [Next].
11
If the [Windows Security] dialog box
is displayed, click [Install this driver
software anyway].
12
Click the [Finish] button.
13
Click [Exit] on the [Setup] window.
14
Click [Start] > [Devices and Printers].
15
Check that the TOSHIBA
e-STUDIO403S(FAX) icon is displayed.
If a printer driver for the machine is already
installed, the TOSHIBA e-STUDIO403S icon may
represent these drivers. In this case, right-click
the TOSHIBA e-STUDIO403S icon and select one
of the menu items, and then check that the fax
driver is displayed in the submenu.
16
Remove the "Software DVD-ROM" from
the computer.
The installation is complete.
- 49 -
Faxing from a Computer (For Windows)
3