Siemens 4075 Operating Instructions Manual page 3

Table of Contents

Advertisement

Installation notes
O
A 220/230Vac mains socket and an ISDN telephone socket must be available
at the installation site.
O
Install in a central location, e.g. in a hallway.
O
The installation site should not be located in the immediate vicinity of other
devices such as stereo systems, televisions, office equipment or
microwaves, as this could result in interference.
The base station is also suitable for wall mounting. The device is attached
O
using two 5 mm screws which are not screwed in fully. The base station is
then hung onto these screws.
O
The maximum outdoor range between the base station and the handset is
300 m. A range of up to 50 m can be achieved indoors.
O
If wall mounting is not required, simply stand the base station on a level,
non-slip surface. The device feet do not normally leave marks on the
installation surface. However, due to the variety of varnishes and polishes in
use, marks could be left at the points of contact.
Contents of packaging
O
1 base station
O
1 mains connection cable with a plug-in power supply unit
O
1 ISDN connection cable
O
1 USB cable
1 set of operating instructions
O
O
1 CD-ROM "talk & surf"
O
1 set of "talk & surf" installation instructions
Gigaset 4075isdn Comfort also includes:
O
1 Gigaset 4000 Comfort telephone
O
1 Gigaset 4000 L telephone charger
III

Advertisement

Table of Contents
loading

Table of Contents