Security settings
Step
by
Step
Change system PIN
The base PIN (Personal Identification Number) protects all your system settings
against unauthorized modifications. Your Gigaset 4070/4075isdn is delivered
with the PIN 0000.
Press
1.
Select using [
2.
Security
Enter the base PIN (factory setting:0000) and confirm with [OK].
3.
Select using [
4.
Repeat the new base PIN (max. 8 digits) and confirm with [OK].
5.
6.
Repeat the new base PIN and confirm with [OK].
Defining authorizations
It is possible to set different authorizations for all registered devices:
8QUHVWUL.WHG
1.
(Default setting)
All devices can accept incoming calls and make outgoing external/internal
calls.
2. ,Q.RPLQJRQO\
The devices can only accept incoming calls. External calls cannot be made,
apart from those to emergency numbers.
3. ,17RQO\
The devices can only accept and handle internal calls.
Calls to the emergency services can be made.
Press
1.
Select using [
2.
Security
Enter the system PIN and confirm with [OK].
3.
Select using [
4.
(desired authorization,
or *for selection menus.
] and [OK]:
Service Set up
.
Change PIN
] and [OK]:
Note the new base PIN carefully. If you forget your PIN, the device will
need to be opened. In this case, contact the Siemens Hotline.
or *for selection menus.
Service Set up
] and [OK]:
.
] and [OK]:
Accesses
'
before menu command = ON / no = OFF ) .
o
or
Base Set up
.
o
Base Set up
or
o (desired internal subscriber) o [
o
Settings
o
Settings
] o
9
55