Table of Contents
Advertisement
Toggle
Step
by
With the toggle feature, you can switch between an active and inactive
Step
connection. The active connection is put on hold.
You can switch between called parties with [
1.
Ending an enquiry call/toggle
1.
Press
Select using [
2.
You are reconnected with the subscriber on hold.
Conference circuit
A conference circuit enables you to talk to two parties at the same time. These
can either comprise two external subscribers, or one external and one internal
subscriber.
Setting up three way calling
You are conducting an enquiry call. The first subscriber is put on hold.
Press [CONF .]: This establishes the conference circuit.
1.
Ending three-way calling
You are conducting three-way calling.
Press [INDIVID]: The conference call is terminated. The connection which was
1.
active immediately before three-way calling was set up is reestablished as the
active connection. The other subscriber is put on hold once more.
Setting up an external enquiry call
You would like to call an internal subscriber during an external call; see „Setting
external/internal enquiry calls" on page 26:
Press
1.
Select using [
2.
Enter the call number for the second subscriber.
3.
Ending an external enquiry call
You are conducting an enquiry call which you would like to end:
1.
Press
Select using [
2.
Transferring calls on/before answer – ECT (Explicit Call Transfer)
ECT is currently only supported behind PABXs. To activate/deactivate call
transfer, see Page25 .
You are conducting an external call which you would like to transfer to another
external subscriber.
Press
1.
Select using [
2.
Enter the call number to which the call is to be transferred.
3.
Replace the handset:
4.
or
Conduct the enquiry call.
4.
5.
Replace the handset:
32
or *for the menu.
] and [OK]:
End
or *for the menu.
] and [OK]:
Consultation
or *for the menu.
] and [OK]:
End
or *for the menu.
] and [OK]:
Consultation
press
press
Ž
] and [
.
.
.
.
€
.
€
.
].
Advertisement
Table of Contents
